PRODUCTS.

Product display

Products

Use:

It is installed upstream pump and on the side of the tank.

Basic parameters:

1. Flow: 63 ~ 1200L/min;
Removal Rating: 50, 100, 180 microns (users can specify according to actual requirement);
Working temperature:-30 ° C ~ 110 °;
4. Indicator Setting:-0.25bar;
5. Bypass Setting:-0.3bar.

Note:

1. The installation position of the filter should be located below the minimum liquid level line of the oil tank to prevent the pump suction;
2. Before replacing the filter element, (rotate the bolt on the top of the filter, withdraw 33mm) close the self-sealing valve;
3. After replacing the filter element, open the self-sealing valve (rotate the bolt on the top of the filter to end).

SEF In-tank Suction filter

Use:

It is installed upstream of the oil suction pump of the hydraulic system and on the oil suction pipe inside the hydraulic oil tank.

Basic parameters:

1. Model: SEF oil suction filter
2. Quota flow: 15 ~ 1200L/min;
3. Filtering accuracy: 100 and 180 microns (users can specify separately according to actual work needs);
4. Working temperature:-30 ° C ~ 120 °;

Note:

The installation position of the product should be located below the minimum liquid level line of the oil tank to prevent the oil suction pump from being empty.

RAF Tank-top Return Filter

Use:

Install it on the top of the hydraulic system reservoir, connect the return line, and filter the hydraulic oil returned to the hydraulic reservoir.

Basic parameters:

1, line flow: 40 ~ 500L/min; 2. Filtering accuracy: 5, 10, 20 microns (users can specify separately according to actual work needs);
3, working pressure: maximum 3bar
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 1.5bar;
6, bypass valve opening pressure: 1.75bar.

Note:

When installing the product, use a splash guard (included with the product).

RHF Tank-top Return Filter

Use:

Install it on the top of the hydraulic system reservoir, connect the return line, and filter the hydraulic oil returned to the hydraulic reservoir.

Basic parameters:

1. Quota flow: 40 ~ 1000L/min;
2. Filtering accuracy: 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 10bar
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 1.5bar;
6, bypass valve opening pressure: 2bar.

Note:

When installing the product, use a splash guard (included with the product).

RIF In-tank Return Filter

Use:

It is installed in the hydraulic system oil tank, and the return line is connected to the front filter oil tank, and then returns to the main hydraulic oil tank through the filter. The product is equipped with magnetic steel, which can absorb metal impurities in the oil before filtering and prolong the working life of the product.

Basic parameters:

1. Quota flow: 170 ~ 2000L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 10bar
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: none;
6, bypass valve opening pressure: 1.5bar.

Note:

When installing the product, use a splash guard (included with the product).

RSF Tank-side Return Filter

Use:

Install it on the side or bottom of the hydraulic oil tank of the hydraulic system, connect the return line, and filter the hydraulic oil returned to the hydraulic oil tank. The product is equipped with a self-sealing valve to ensure that the oil in the oil tank does not flow out when the filter element is replaced.

Basic parameters:

1. Quota flow: 63 ~ 1000L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 16bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 3.5bar;
6, bypass valve opening pressure: 4bar.

Note:

1. Before replacing the filter element, (turn the bolt on the top of the product counterclockwise) close the self-sealing valve;
2. After replacing the filter element, open the self-sealing valve (turn the top bolt of the product clockwise).

RTF Tank-top Return Filter

Use:

Install it on the top of the hydraulic system reservoir, connect the return line, and filter the hydraulic oil returned to the hydraulic reservoir.

Basic parameters:

1. Quota flow: 63 ~ 1200L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 16bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 3.5bar;
6, bypass valve opening pressure: 4bar.

Note:

When installing the product, use a splash guard (included with the product).

SRF Tank-top Suction/Return Filter

Use:

Install it on the top of the hydraulic oil tank of the hydraulic system, connect the return and suction lines, and filter the hydraulic oil in the hydraulic system.

Basic parameters:

1. Quota flow: 400,800 L/min;
2. Filtering accuracy: oil return: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);

Oil absorption: 50 microns;
3. Working pressure: maximum 10bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 2bar;
6, bypass valve opening pressure: 2.5bar.
7, back pressure valve opening pressure: 0.5bar.

Note:

1. The upper part of the connecting pipe is an oil suction interface;
2. The lower part of the connecting pipe is an oil return interface.

PAF High Pressure Filter

Use:

It is installed in the pipeline after the working oil pump of the hydraulic system and in front of the hydraulic components to be protected.

Basic parameters:

1. Quota flow: 30 ~ 660L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 420bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 5bar;
6, bypass valve opening pressure: 6bar.

PBF High Pressure Filter

Use:

It is installed in the pipeline after the working oil pump of the hydraulic system and in front of the hydraulic components to be protected.

Basic parameters:

1. Quota flow: 30 ~ 240L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 210bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 5bar;
6, bypass valve opening pressure: 6bar.

Note:

Maintenance video (click to view)

PCF medium pressure Filter

Use:

It is installed in the pipeline after the working oil pump of the hydraulic system and in front of the hydraulic components to be protected.

Basic parameters:

1. Quota flow: 30 ~ 660L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 70bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 5bar;
6, bypass valve opening pressure: 6bar.

PDF high pressure Duplex Filter

Use:

Installed after the working oil pump of the hydraulic system, in the pipeline before the hydraulic components that need to be protected, the product is equipped with a switching valve, a set of filters work, and a set of spare, which can meet the continuous operation of the system without stopping.

Basic parameters:

1. Quota flow: 30 ~ 660L/min; 2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 315bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 5bar;
6, bypass valve opening pressure: 6bar.

Note:

When replacing the filter element, first turn the switching valve to connect the working filter group, close the filter group that needs to be replaced, and then replace the spare group filter element according to the steps.

PJF low pressure Duplex Filter

PLF Low pressure Duplex Filter

Use:

It is installed in the hydraulic system pipeline to filter the working fluid of the system. The product has a double switching form, which can meet the requirements of continuous work and no shutdown of the system.

Basic parameters:

1. Quota flow: 60 ~ 10320L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 16bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 2bar;
6, bypass valve opening pressure: 3bar.

Note:

If a double-switching filter is used, when replacing the filter element, first turn the switching valve to connect the working filter group, close the filter group that needs to be replaced, and then replace the filter element of the spare group filter element according to the steps.

PMF high pressure Manifold Filter

Use:

It is installed on the plate mounting block after the working oil pump of the hydraulic system and in front of the hydraulic components to be protected.

Basic parameters:

1. Quota flow: 30 ~ 660L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 320bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 5bar;
6, bypass valve opening pressure: 6bar.

Note:

When installing the product, pay attention to the direction of oil circulation in and out.

HSF high pressure Spin-on Filter

Use:

Installed in the hydraulic system, can be used as oil suction, oil return or low pressure filter.

Basic parameters:

1. Quota flow: 60 ~ 240L/min;
2. Filtering accuracy: 2, 5, 10, 20 microns (users can specify separately according to actual work needs);
3. Working pressure: maximum 12bar;
4, working temperature:-30°C ~ 120 °;
5, the transmitter alarm pressure: 1.5bar;
6, bypass valve opening pressure: 2bar.

Note:

When replacing and installing the filter element, tighten it by 3/4 circle according to the figure on the filter element.

< 1 2 >

Pay attention to WeChat public number

Contact Us

Operator:021-33524776

Telephone:021-33524776
Mailbox:info@clean-hydraulics.com
Address: 199 Yeyuan Road, Yexie Town, Songjiang District, Shanghai

Power by：www.300.cn